Advantest R3265A - Spectrum Analyzer

• 100 Hz to 8 GHz
• 10 Hz to 3 MHz RBW
• 140 dBm dynamic range
• Extensive EMC measurement functions
• Fast 5 µs/div digitized sweep and gated sweep function allows for analysis of TDMA and other burst signals
• Built-in frequency counter with 1 Hz resolution
• Demodulated audio output with speaker
• External memory card saves settings
• GPIB



Agilent E4448A - PSA Spectrum Analyzer

• 3 Hz - 50 GHz
• ±0.19 dB absolute amplitude accuracy
• -154 dBm displayed average noise level (DANL)
• -118 dBc/Hz phase noise at 10 kHz offset
• 81 dB W-CDMA ACLR dynamic range



Agilent 4395A - Network/Spectrum/Impedance Analyzer

• 10 Hz to 500 MHz, 1 mHz resolution
• Full-vector network and spectrum measurement and analysis
• Wide dynamic range network measurement with fast sweep speeds
• ±0.05 dB, ±0.3° dynamic magnitude/phase accuracy
• Extremely fast narrowband spectrum measurement
• Impedance analysis option and test kit available
• 45 dBm/Hz sensitivity for spectrum analysis
• Built-in IBASIC for easy test automation
• Time-gated spectrum analysis option
• Color TFT display and built-in disk drive/RAM disk



Agilent 8591A - RF Spectrum Analyzer

• Frequency range: 9 kHz to 1.8 GHz, 1 MHz to 1.8 GHz (opt 001)
• Span range: 0 Hz (zero span), 10 kHz to 1.8 GHz
• Span accuracy: Span ≤ 10 MHz: ±2% of span, Span> 10 MHz: ±3%
• Sweeptime Range: Span = 0 Hz or > 10 kHz: 20 ms to 100 s
• Sweeptime Accuracy: 20 ms to 100 s: ±3%
• Amplitude range: -115 to +30 dBm
• Displayed average noise level: ≤ -115 to ≤ -113 dBm
• Resolution bandwidth: 1 kHz to 3 MHz, ±20%; 9 kHz and 120 kHz (6 dB)
• Video bandwidth range: 30 Hz to 1 MHz
• Built-in memory card reader



Anritsu MS2661C - Spectrum analyzer

• Frequency range 9kHz to 3GHz
• Resolution bandwidth 1kHz to 3MHz
• Noise sideband less than -100 dBc/Hz (1 GHz, 10 kHz offset)
• Level measurement range average noise level to +30 dBm
• Average noise level less than -115 dBm (1MHz to 1GHz)
• Less than -115dBm + f[GHz]dB(>1GHz)
• Less than -114dBm (1MHz to 1GHz, at Option 08 pre-amplifier installed)
• Less than -114dBm + 1.5f[GHz]dB (>1GHz, at Option 08 pre-amplifier installed)
• Reference level ±0.4dB(-49.9 to 0dBm)
• ±0.75dB(-69.9 to -50dBm, 0.1 to +30dBm)
• ±1.5dB(-80 to -70dBm)



Rohde & Schwarz FSP30 - FSP Spectrum Analyzer

• Frequency range 20Hz to 30 GHz
• Resolution bandwidth 1 Hz to 10 MHz
• Displayed average noise level -155 dBm (1 Hz)
• Phase noise -113 dB (1 Hz) at 10 kHz
• Channel filters from 100 Hz to 5 MHz and RRC filters
• FFT filters from 1Hz to 30 kHz
• EMI bandwidths and quasi-peak detector
• Total measurement uncertainty 0.5 dB
• Measurement routines for TOI, ACP(R), OBW, CCDF, APD, etc. as standard
• Fast ACP in time domain
• Up to 80 measurements per second (including trace transfer via GPIB)
• Electronic attenuator
• Application firmware available for GSM/EDGE, Bluetooth, WCDMA/HSDPA/TD-SCDMA, CDMA2000/1xEV-DV/1xEV-DO, WLAN